Scale Factors of the Thermospheric Density: A Comparison of Satellite Laser Ranging and Accelerometer Solutions

A major problem in the precise orbit determination (POD) of satellites at altitudes below 1,000 km is the modeling of the aerodynamic drag which mainly depends on the thermospheric density and causes the largest non‐gravitational acceleration. Typically, empirical thermosphere models are used to calculate density values at satellite positions but current thermosphere models cannot provide the required accuracy. Thus, unaccounted variations in the thermospheric density may lead to significantly incorrect satellite positions. For the first time, we bring together thermospheric density corrections for the NRLMSISE‐00 model in terms of scale factors with a temporal resolution of 12 hr derived from satellite laser ranging (SLR) and accelerometer measurements. Whereas, the latter are in situ information given along the satellite orbit, SLR results have to be interpreted as mean values along the orbit within the underlying time interval. From their comparison, we notice a rather similar behavior with correlations of up to 80% and more depending on altitude. During high solar activity, scale factors vary around 30% at low solar activity and up to 70% at high solar activity from the value one. In addition, we found the scaled thermospheric density decreasing stronger as the modeled density of NRLMSISE‐00. To check the reliability of the SLR‐derived scale factors, we compare the POD result of two different software packages, namely DOGS‐OC from DGFI‐TUM and GROOPS from IGG Bonn. Furthermore, a validation of our estimated scale factors with respect to an external data set proofs the high quality of the obtained results. Plain Language Summary Variations in the density of the thermosphere must be taken into account when modeling and predicting the motion of satellites in the near‐Earth environment. Typically, thermospheric densities at the position of satellites are provided by models, but their accuracy is limited. Due to the sensitivity of satellites orbiting the Earth in the altitude range of the thermosphere, they can be used to derive information about the thermospheric density. In this study, we compare for the first time thermospheric density corrections in terms of scale factors for the NRLMSISE‐00 model with a temporal resolution of 12 hr derived from two geodetic measurement techniques, namely satellite laser ranging (SLR) and accelerometry. Our results demonstrate that both measurement techniques can be used to derive comparable scale factors of the thermos