Single Event Burnout Hardening of Enhancement Mode HEMTs With Double Field Plates

Single event burnout (SEB) of enhancement mode GaN high-electron mobility transistors (HEMTs) under heavy ion irradiation is systematically studied based on simulations in this work. Susceptibility to SEB of different particle incidence environments is investigated to determine the device's sen...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on nuclear science 2021-09, Vol.68 (9), p.2358-2366
Hauptverfasser: Zhen, Zixin, Feng, Chun, Wang, Quan, Niu, Di, Wang, Xiaoliang, Tan, Manqing
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Single event burnout (SEB) of enhancement mode GaN high-electron mobility transistors (HEMTs) under heavy ion irradiation is systematically studied based on simulations in this work. Susceptibility to SEB of different particle incidence environments is investigated to determine the device's sensitive position. Under these conditions, the mechanism of SEB in enhancement mode HEMTs is mainly associated with the charge congestion and subsequent continuous impact ionization. A hardened HEMT structure with the gate and drain double field plates is proposed correspondingly. Apart from better output characteristics and almost 25% improvement of breakdown voltage, the hardened structure also demonstrates better tolerance of SEB. This hardened structure can modify the electric field in the high field region so that charge accumulation is reduced significantly, thus effectively decreasing the possibility of SEB's occurrence. With a vertical heavy ion strike of 63.8 MeV \cdot cm 2 /mg linear energy transfer (LET), SEB threshold voltage of the conventional structure HEMT is 160 V, while that of the hardened structure HEMT is much higher, reaching 249 V. Besides, the hardened device exhibits better SEB tolerance than the conventional device even at different higher LET conditions. Furthermore, the contribution to SEB tolerance of each field plate is also discussed.
ISSN:0018-9499
1558-1578
DOI:10.1109/TNS.2021.3102980