Effect of the Addition of Flocculants and KCl on Sedimentation Rate of Spodumene Tailings

Lithium has become an element of great relevance in recent times, because among its various applications is the manufacture of batteries, and it is a vital part of the growing development of new products such as electric vehicles. On the other hand, the geographical distribution of lithium reserves is very heterogeneous. Of the existing minerals, only some of them are important sources of exploitation, such as the salt in South America, while in other countries mineral deposits such as spodumene stand out. The process for obtaining lithium from spodumene consists of concentrating up to 3% lithium by flotation. Because other minerals associated with this mineral are mainly silicates (feldspar, clays, quartz and micas), great problems are generated in the thickening stage. This article seeks to study the effect of the addition of flocculants and KCl on the sedimentation rate, in addition to studying its effects on the turbidity of the supernatant in different types of water. This is done by Batch sedimentation tests with tailings pulps, to later characterize both the pulp and the supernatant by means of the turbidity of the clarified water. Magnafloc-338 flocculant is the most convenient to use with industrial water, since it reaches a high sedimentation rate of 34.2, 37.44, and 45.36 m/h, with doses of 5, 10, and 15 g/t respectively, and a low turbidity rate (31 Formazin Nephelometric Units (FNU)) at low flocculant dosages.