On the Importance of Joint Mitigation Strategies for Front, Bulk, and Rear Recombination in Ultrathin Cu(In,Ga)Se-2 Solar Cells

Several optoelectronic issues, such as poor optical absorption and recombination, limit the power conversion efficiency of ultrathin Cu(In,Ga)Se-2 (CIGS) solar cells. To mitigate recombination losses, two combined strategies were implemented: a potassium fluoride (KF) post-deposition treatment (PDT) and a rear interface passivation strategy based on an aluminum oxide (Al2O3) point contact structure. The simultaneous implementation of both strategies is reported for the first time on ultrathin CIGS devices. Electrical measurements and 1D simulations demonstrate that in specific conditions, devices with only KF-PDT may outperform rear interface passivation based devices. By combining KF-PDT and rear interface passivation, an enhancement in an open-circuit voltage of 178 mV is reached over devices that have a rear passivation only, and of 85 mV over devices with only a KF-PDT process. Time-Resolved Photoluminescence measurements showed the beneficial effects of combining KF-PDT and the rear interface passivation at decreasing recombination losses in the studied devices, enhancing charge carrier lifetime. X-ray photoelectron spectroscopy measurements indicate the presence of an In and Se-rich layer that we linked to be a KInSe2 layer. Our results suggest that when bulk and front interface recombination values are very high, they dominate, and individual passivation strategies work poorly. Hence, this work shows that for ultrathin devices, passivation mitigation strategies need to be implemented in tandem.