Microstructural damage behaviour of Al foams

[Display omitted] Microheterogeneous materials such as metal foams exhibit a strong structure-property-relationship. The macroscopic material properties depend on the pore geometry and especially on the strut geometry and the microstructure of the struts such as the grain structure. Since the grain structure in the struts differs from that of the corresponding bulk material, it is of utmost importance to perform microtensile tests on individual struts. Previous works on aluminium foams outlined strong scattering in this micromechanical properties. A possible reason for the scattering might be micro-porosity and inclusions in the struts resulting from the manufacturing of metal foams by investment casting. The present contribution deals with ex situ and In situ microtensile tests to elucidate reasons for the scattering in the micromechanical properties determined from microtensile tests on individual struts. In situ tensile tests using high resolution X-ray computed tomography were used to study the microstructural failure mechanisms in aluminium foam struts. The results were further proven by additional ex situ tensile experiments on struts, which were analysed by low resolution X-ray computed tomography prior to tensile testing to allow for more specimens and hence for better statistics. Micro-porosity and primary inclusions were found to be the main reason for differences in the micromechanical properties of individual aluminium foam struts.