Carbon-encapsulated iron nanoparticles as reusable adsorbents for micropollutants removal from water

[Display omitted] •Carbon-encapsulated iron nanoparticles (CE-nFe) prepared by hydrothermal carbonization.•CE-nFe showed a core-shell structure composed by zero-valent iron and graphitized carbon.•The adsorbent led to a fast removal of DCF, MNZ and SMX (less than 30 min).•The saturated adsorbents were effectively regenerated by heterogeneous Fenton oxidation.•The micropollutant’s nature affected the regeneration yield in the order: SMX > DCF > MNZ. Adsorption represents the most plausible technology for micropollutants removal from water nowadays. Nevertheless, the regeneration of the saturated carbon materials is still an important challenge, being these solids in practice commonly disposed. This work aims at overcoming this issue by using innovative carbon-encapsulated iron nanoparticles (CE-nFe). This material was synthesized by a low-cost and green method viz. hydrothermal carbonization (HTC), using olive mill wastewater as carbonaceous source. The solid was fully characterized by different techniques (magnetic properties, elemental analyses, N2-sorption isotherms, pHPZC, ICP, XRD and TEM). It showed a clear core-shell structure of around 40 nm in diameter. The core was mainly formed by zero-valent iron and the shell by graphitized carbon. Accordingly, it showed an essentially mesoporous structure, with a specific surface area of 169 m2 g−1, and a clear hydrophobic character (pHPZC = 10). Its adsorption performance was investigated using three relevant micropollutants (diclofenac (DCF), sulfamethoxazole (SMX) and metronidazole (MNZ)). A very fast removal of the micropollutants was achieved (30 min at the most, with rate constants in the range of 0.11–0.41 g mg−1 min−1). The adsorption isotherms revealed the vertical packing of the adsorbate molecules onto the adsorbent active centers, being the data successfully described by the GAB model. The saturated adsorbents were effectively regenerated by heterogeneous Fenton oxidation, taking advantage of the iron core of CE-nFe and the opened mesoporous carbon shell. The regeneration efficiency increased with increasing the operating temperature (25–75 °C) and contact time (1–4 h), as well as the H2O2 dose up to 6 g L-1. The micropollutant nature affected the adsorbent regeneration yield in the order: SMX > DCF > MNZ, consistent with their reactivity towards Fenton oxidation.