Sedimentation of short cylindrical pollutants with mechanical contacts
Lattice Boltzmann method and elastic particle collision model were used to investigate the sedimentation of short cylindrical pollutant particles with mechanical contacts for varying bulk number density ε and terminal Reynolds number ReT. The corresponding experiments were performed as a comparison....
Gespeichert in:
Veröffentlicht in: | Journal of environmental sciences (China) 2005, Vol.17 (6), p.906-911 |
---|---|
Hauptverfasser: | , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Lattice Boltzmann method and elastic particle collision model were used to investigate the sedimentation of short cylindrical pollutant particles with mechanical contacts for varying bulk number density ε and terminal Reynolds number ReT. The corresponding experiments were performed as a comparison. The clusters of pollutant particles with an inverted “T” structure were observed, the pollutant particles for high ε and large ReT scattered wider than that for low ε and small ReT. The sedimentation velocities increased suddenly at the initial stage, then decreased drastically, after that swayed around and approached to a steady value. The time to steady state did not depend on ε and ReT. The effect of particle interactions was to hinder the average sedimentation velocity, and hindrance was directly proportional to ε. The orientation distributions of pollutant particles depended on ReT and ε, especially on the former. Both the standard deviations of vertical and horizontal velocity, the former was larger than the latter, were nearly independent on ε and ReT. |
---|---|
ISSN: | 1001-0742 1878-7320 |
DOI: | 10.3321/j.issn:1001-0742.2005.06.005 |