Implementation of a Petrographical and Petrophysical Workflow Protocol for Studying the Impact of Heterogeneity on the Rock Typing and Reservoir Quality of Reefal Limestone: A Case Study on the Nullipore Carbonates in the Gulf of Suez

This study focuses on the heterogeneity of the middle Miocene syn‐rift Belayim nullipore (reefal) marine sequences in the Gulf of Suez and its impacts on reservoir quality. The sequences consist of coralline algal reef limestones with a highly complex dual‐porosity system of primary and secondary porosities of widely varying percentages. To achieve a precise mathematical modeling of these reservoir sequences, a workflow protocol was applied to separate these sequences into a number of hydraulic flow units (HFUs) and reservoir rock types (RRTs). This has been achieved by conducting a conventional core analysis on the nullipore marine sequence. To illustrate the heterogeneity of the nullipore reservoir, the Dykstra‐Parsons coefficient (V) has been estimated (V = 0.91), indicating an extremely heterogeneous reservoir. A slight to high anisotropy (λk) has been assigned for the studied nullipore sequences. A stratigraphic modified Lorenz plot (SMLP) was applied to define the optimum number of HFUs and barriers/baffles in each of the studied wells. Integrating the permeability‐porosity, reservoir quality index‐normalized porosity index (RQI‐NPI) and the RQI‐flow zone indicator (RQI‐FZI) plots, the discrete rock types (DRT) and the R35 techniques enable the discrimination of the reservoir sequences into 4 RRTs/HFUs. The RRT4 packstone samples are characterized by the best reservoir properties (moderate permeability anisotropy, with a good‐to‐fair reservoir quality index), whereas the RRT1 mudstone samples have the lowest flow and storage capacities, as well as the tightest reservoir quality.