Flexible 3D Nanoporous Graphene for Desalination and Bio-decontamination of Brackish Water via Asymmetric Capacitive Deionization

Nanoporous graphene based materials are a promising nanostructured carbon for energy storage and electrosorption applications. We present a novel and facile strategy for fabrication of asymmetrically functionalized microporous activated graphene electrodes for high performance capacitive desalination and disinfection of brackish water. Briefly, thiocarbohydrazide coated silica nanoparticles intercalated graphene sheets are used as a sacrificial material for creating mesoporous graphene followed by alkaline activation process. This fabrication procedure meets the ideal desalination pore diameter with ultrahigh specific surface area ∼ 2680 m2 g–1 of activated 3D graphene based micropores. The obtained activated graphene electrode is modified by carboxymethyl cellulose as negative charge (COO–2) and disinfectant quaternary ammonium cellulose with positively charged polyatomic ions of the structure (NR4 +). Our novel asymmetric coated microporous activated 3D graphene employs nontoxic water-soluble binder which increases the surface wettability and decreases the interfacial resistance and moreover improves the electrode flexibility compared with organic binders. The desalination performance of the fabricated electrodes was evaluated by carrying out single pass mode experiment under various cell potentials with symmetric and asymmetric cells. The asymmetric charge coated microporous activated graphene exhibits exceptional electrosorption capacity of 18.43 mg g–1 at a flow rate of 20 mL min–1 upon applied cell potential of 1.4 V with initial NaCl concentration of 300 mg L–1, high charge efficiency, excellent recyclability, and, moreover, good antibacterial behavior. The present strategy provides a new avenue for producing ultrapure water via green capacitive deionization technology.