A New Reference Sample for High-Frequency Multipactor Testing

[EN] Multipactor (MP) is a high-power effect severely limiting the performance of satellite communication links. A reference sample is normally used in the experimental setups for MP testing in order to verify its correct operation. However, the low gaps required for high frequencies jeopardize the manufacturability of the devices traditionally used for this purpose. A new reference sample, based on a stepped-impedance resonator (SIR), is proposed in this letter. The key design considerations are also outlined. A prototype operating between 17 and 18 GHz has been manufactured and tested, proving the novel structure allows higher gaps, and is, thus, suitable for higher frequency bands. This work was supported in part by the Ministerio de Ciencia e Innovacion (Spanish Government) under Research and Development Project PID2019-103982RB-C41, in part by the European Space Agency(ESA) through several research and development activities, and in part by the ESA-VSC European High Power RF and Space Materials Laboratories for contributing with its installations through the European Regional Development Fund. The work of Pablo Gonzalez was supported by the FPU Fellowship ofthe Ministerio de Educacion, Cultura y Deporte under Grant FPU17/02901. González-Santatecla, P.; Smacchia, D.; Alcaide-Guillén, C.; Soto Pacheco, P.; Rodríguez Pérez, AM.; Morro, JV.; Mata-Sanz, R... (2023). A New Reference Sample for High-Frequency Multipactor Testing. IEEE Microwave and Wireless Technology Letters. 33(6):675-678. https://doi.org/10.1109/LMWT.2023.3239419