Lif kıvrıklığının kızılçam (Pinus brutia Ten.) odunun bazı mekanik özellikleri üzerine etkisi

The effects of spiral grain on some mechanical properties of Calabrian pine wood were studied. For this purpose, 17 sample trees were taken from Çakirlar region, Antalya district. The experimental trees were classifed into five groups according to the values of spiral grain angles as follows: 0- 5 %...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Turkish journal of agriculture and forestry 2000, Vol.24 (1), p.45-50
Hauptverfasser: AKBULUT, Turgay, DÜNDAR, Türker, GÖKER, Yener, AS, Nusret
Format: Artikel
Sprache:tur
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The effects of spiral grain on some mechanical properties of Calabrian pine wood were studied. For this purpose, 17 sample trees were taken from Çakirlar region, Antalya district. The experimental trees were classifed into five groups according to the values of spiral grain angles as follows: 0- 5 % , 5-10 % , 10-15 %, 15-20 %, and > 20 %. No difference was found in bending strength and modulus of elasticity, up to 10 and 15 % spiral grain degrees, respectively. A spiral grain of 20 % or higher can be permitted in compression stresses. If wood has a spiral grain, a tangential shearing test should be used, and if it has a diagonal grain, a radial shearing test should be used. In impact bending, up to 10% spiral grain can be permitted. It was found that the hardness values were also affected by spiral grain.
ISSN:1300-011X
1303-6173