Bio-coal as an alternative reducing agent in the blast furnace
The steel industry is aiming to reduce CO 2 emissions by different means; in the short-term, by replacing fossil coal with highly reactive carbonaceous material like bio-coal (pretreated biomass) and, in the longer term, by using hydrogen. The use of bio-coal as part of top charged briquettes also c...
Gespeichert in:
1. Verfasser: | |
---|---|
Format: | Dissertation |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext bestellen |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | The steel industry is aiming to reduce CO 2 emissions by different means; in the short-term, by replacing fossil coal with highly reactive carbonaceous material like bio-coal (pretreated biomass) and, in the longer term, by using hydrogen. The use of bio-coal as part of top charged briquettes also containing iron oxide has the potential to lower the thermal reserve zone temperature of the Blast furnace (BF) and, due to improved gas efficiency, thereby give a high replacement ratio to coke.
In order to select a suitable bio-coal to be contained in agglomerates with iron oxide, the current study aims at investigating the devolatilization behavior and related kinetics of different types of bio-coals. In addition, the aim is to investigate the self-reduction behavior of bio-coal-containing iron ore composite under inert condition and simulated blast furnace thermal profile.
In the BF the temperature of the top-charged material will increase rather quickly during the descent in the upper part. Ideally, all the carbon and hydrogen contained in the top-charged bio-coal should contribute to the reduction. The devolatilization of bio-coal is thus important to understand and to compare between different types of bio-coal.
To explore the devolatilization behavior for different materials, a thermogravimetric analyzer equipped with a quadrupole mass spectrometer was used to monitor the weight loss and off-gases during non-isothermal tests for bio-coals having different contents of volatile matter. The samples were heated in an inert atmosphere up to 1200°C at three different heating rates: 5, 10 and 15°C/min. The thermogravimetric data were evaluated by using the Kissinger–Akahira–Sonuse (KAS) iso-conversational model and the activation energy was determined as a function of the conversion degree. Bio-coals with both low and high content of volatile matter can produce reducing gases that can contribute to the reduction of iron oxide in bio-agglomerates. Bio-coals containing a higher content of catalyzing components such as CaO and K 2 O will enhance the devolatilization and release of volatile matter at a lower temperature.
The self–reduction of composites was investigated by thermogravimetric analyses in argon atmosphere up to 1100°C and evolved gases were monitored by means of quadrupole mass spectroscopy. Composites with and without 10% bio-coal and sufficient coke breeze to keep the C/O molar ratio equal to one were mixed and Portland cement was used as a binder. |
---|