Fundamental investigation to improve the quality of cold mix asphalt

Cold mix asphalt (CMA) emulsion technology could become an attractive option for the road industry as it offers lower startup and equipment installation costs, energy consumption and environmental impact than traditional alternatives. The adhesion between bitumen and aggregates is influenced by diverse parameters, such as changes in surface free energies of the binder and aggregates or the presence of moisture or dust on the surface of aggregates, mixing temperatures, surface textures (including open porosity), nature of the minerals present and their surface chemical composition, as well as additives in the binder phase. The performance of cold asphalt mixtures is strongly influenced by the wetting of bitumen on surfaces of the aggregates, which is governed by breaking and coalescence processes in bitumen emulsions. Better understanding of these processes is required. Thus, in the work this thesis is based upon, the surface free energies of both minerals/aggregates and binders were characterized using two approaches, based on contact angles and vapor sorption methods. The precise specific surface areas of four kinds of aggregates and seven minerals were determined using an approach based on BET (Brunauer, Emmett and Teller) theory, by measuring the physical adsorption of selected gas vapors on their surfaces and calculating the amount of adsorbed vapors corresponding to monolayer occupancy on the surfaces. Interfacial bond strengths between bitumen and aggregates were calculated based on measured surface free energy components of minerals/aggregates and binders, in both dry and wet conditions. In addition, a new experimental method has been developed to study bitumen coalescence by monitoring the shape relaxation of bitumen droplets in an emulsion environment. Using this method, the coalescence of spherical droplets of different bitumen grades has been correlated with neck growth, densification and changes in surface area during the coalescence process. The test protocol was designed to study the coalescence process in varied environmental conditions provided by a climate-controlled chamber. Presented results show that temperature and other variables influence kinetics of the relaxation process. They also show that the developed test procedure is repeatable and suitable for studying larger-scale coalescence processes. However, possible differences in measured parametric relationships between the bitumen emulsion scale and larger scales require further inv