Dynamic simulation study of the secondary frequency regulation of a 1000 MW thermal power unit assisted by flywheel energy storage

The rapid development of new energy sources has brought a certain impact on the original power grid structure, accelerated the wear of unit equipment, and affected the stability, safety, and economy of thermal power unit operation, so it is proposed to add an energy storage system to solve the above problems. To analyze the secondary frequency regulation effect of thermal power units assisted by a flywheel energy storage system, a mathematical model of the control strategy on both sides of the boiler, steam turbine, and flywheel permanent magnet synchronous motor is proposed, and a two-regional power grid model is built through MATLAB/Simulink to simulate the frequency regulation effect of units with or without energy storage participation through step disturbance and continuous disturbance, which are 0.045 and 0.023 p.u. MW. Under step disturbance, the frequency fluctuation of the coupled energy storage system changed by 0.025 228 p.u. Hz, the time for the system to return to a steady state was shortened by 5.85 s, the maximum change of the frequency of the system in Region 2 was reduced by 0.025 579 p.u. Hz, and under continuous disturbance, the fluctuation of the output power of the steam turbine in Region 1 was reduced by 0.022 982 p.u. MW. In summary, under the same disturbance conditions in the outside world, the use of flywheel energy storage to assist the frequency regulation of thermal power units can effectively reduce the frequency fluctuation of the system, reduce the fluctuation of the output power of the steam turbine, reduce the loss of mechanical equipment, and extend the service life of the unit to a certain extent.