Numerical simulation of dynamic stall flow control using a multi-dielectric barrier discharge plasma actuation strategy
To alleviate the deterioration in wind turbine performance caused by dynamic stall, the flow control of a pitching NACA0012 airfoil is investigated through numerical simulation of an alternating current dielectric barrier discharge (AC-DBD) plasma actuator at a Reynolds number Re = 135 000. To avoid...
Gespeichert in:
Veröffentlicht in: | Physics of plasmas 2022-10, Vol.29 (10) |
---|---|
Hauptverfasser: | , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | To alleviate the deterioration in wind turbine performance caused by dynamic stall, the flow control of a pitching NACA0012 airfoil is investigated through numerical simulation of an alternating current dielectric barrier discharge (AC-DBD) plasma actuator at a Reynolds number Re = 135 000. To avoid the harmonic oscillations of aerodynamic force caused by unsteady DBD actuation, this work focuses on improving the control potential for steady actuation. The control mechanisms of actuators at various positions are investigated using five groups of actuators mounted at 0%, 3%, 10%, 45%, and 80% chord lengths c above the upper surface of an airfoil. The actuator at 80%c performs more efficiently in terms of lift enhancement in the initial upstroke and the final downstroke. The actuator at 0%c suppresses the growth of the leading-edge vortex and maintains the suction of the dynamic stall vortex (DSV). After the shedding of the DSV, it suppresses the secondary separation to delay the onset of dynamic stall. At the flow reattachment stage, the actuators at 3%c and 10%c accelerate the boundary layer reattachment by momentum injection. From these results, a multi-DBD control strategy is proposed. The scheme selects the optimal actuator in operation at a certain stage of dynamic stall and takes advantage of actuators at different positions to enhance the average and maximum aerodynamic force, delay the onset of dynamic stall, accelerate flow reattachment, and avoid excessive energy consumption. |
---|---|
ISSN: | 1070-664X 1089-7674 |
DOI: | 10.1063/5.0107530 |