Two-dimensional parametric design of short pulse laser driven iron opacity experiments

High intensity short pulse lasers are commonly used to create high temperature and high density plasmas. These plasmas are used to study fundamental properties such as the equation of state and opacity. The targets often use small-diameter, thin buried layers of the materials of interest, surrounded...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Physics of plasmas 2022-05, Vol.29 (5)
Hauptverfasser: London, Richard A., Colón Quiñones, Roberto A., Martin, Madison E., Whitley, Heather D.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:High intensity short pulse lasers are commonly used to create high temperature and high density plasmas. These plasmas are used to study fundamental properties such as the equation of state and opacity. The targets often use small-diameter, thin buried layers of the materials of interest, surrounded by a tamper of low atomic number material such as plastic. Computational modeling is used to design and interpret experiments with short pulse lasers. Most of the modeling to date has assumed one-dimensional plane-parallel geometry. In this paper, the effects of radial gradients in the irradiation of thin planar targets are studied with one- and two-dimensional radiation/hydrodynamic simulations. It is found that the main effect of radial gradients is the averaging of plasma conditions and x-ray emission over the pattern of irradiation. Differences between one- and two-dimensional simulations arise because the plasma conditions and x-ray emission are, in general, nonlinear functions of the temperature of the plasma and thereby also nonlinear functions of the irradiation intensity. The differences increase with the ratio of the buried layer radius to the laser spot radius. The root mean square difference in the inferred iron L-shell opacity is less than 30% when the ratio is less than 1.0 and about 70% when the ratio is 1.5.
ISSN:1070-664X
1089-7674
DOI:10.1063/5.0085635