A study of tensile strength of MIG welding-brazing dissimilar lap joints of mild steel and aluminum alloy

A study of tensile strength of MIG welding-brazing dissimilar lap joints of mild steel and aluminum alloy

A new joining method, termed Metal Inert Gas welding with Lap configuration, was attempted to weld Mild Steel to Aluminum Alloy. The mechanical strength was investigated using tensile test. The results indicated that, the Mild Steel with two holes have the maximum ultimate tensile strength of 100.57...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Beleed, Abdulnasser Embark, Shaiful, A. I. M., Roslan, Muhamad Fahmi Mohd, Omar, M. N. B., Mohamed, Mazlan
Format: Tagungsbericht
Sprache:eng
Schlagworte:
Aluminum alloys
Aluminum base alloys
Brazing alloys
Configurations
Gas metal arc welding
Gas welding
Inert gas welding
Lap joints
Low carbon steels
Maintenance management
Rare gases
Shielding
Tensile strength
Tensile tests
Ultimate tensile strength
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:A new joining method, termed Metal Inert Gas welding with Lap configuration, was attempted to weld Mild Steel to Aluminum Alloy. The mechanical strength was investigated using tensile test. The results indicated that, the Mild Steel with two holes have the maximum ultimate tensile strength of 100.57 MPa. Conclusively the optimum parameters for AA6061 to the Mild Steel welding can be achieved at two holes’ configuration with 17 V voltage, Wire feed 3 m/min and Shielding Gas 10 L/min.
ISSN:0094-243X
1551-7616
DOI:10.1063/1.5118179