Turbulent structures of non-Newtonian solutions containing rigid polymers
The turbulent structure of a channel flow of Xanthan Gum (XG) polymer solution is experimentally investigated and compared with water flow at a Reynolds number of Re = 7200 (based on channel height and properties of water) and Re τ = 220 (based on channel height and friction velocity, u τ0). The pol...
Gespeichert in:
Veröffentlicht in: | Physics of fluids (1994) 2017-10, Vol.29 (10) |
---|---|
Hauptverfasser: | , , |
Format: | Artikel |
Sprache: | eng |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | The turbulent structure of a channel flow of Xanthan Gum (XG) polymer solution is
experimentally investigated and compared with water flow at a Reynolds number of
Re = 7200 (based on channel height and properties of water) and
Re
τ
= 220 (based on channel height and
friction velocity, u
τ0). The polymer
concentration is varied from 75, 100, and 125 ppm to reach the point of maximum drag
reduction (MDR). Measurements are carried out using high-resolution, two-component
Particle Image Velocimetry (PIV) to capture the inner and outer layer turbulence. The
measurements showed that the logarithmic layer shifts away from the wall with increasing
polymer concentration. The slopes of the mean velocity profile for flows containing 100
and 125 ppm XG are greater than that measured for XG at 75 ppm, which is parallel with the
slope obtained for deionized water. The increase in slope results in thickening buffer
layer. At MDR, the streamwise Reynolds stresses are as large as those of the Newtonian
flow while the wall-normal Reynolds stresses and Reynolds shear stresses are significantly
attenuated. The sweep-dominated region in the immediate vicinity of the wall extends
further from the wall with increasing polymer concentration. The near-wall skewness
intensifies towards positive streamwise fluctuations and covers a larger wall-normal
length at larger drag reduction values. The quadrant analysis at
y
+
0
= 25 shows that the addition of polymers inclines the
principal axis of v versus u plot to almost zero
(horizontal) as the joint probability density function of fluctuations becomes symmetric
with respect to the u axis at MDR. The reduction of turbulence production
is mainly associated with the attenuation of the ejection motions. The spatial-correlation
of the fluctuating velocity field shows that increasing the polymer concentration
increases the spatial coherence of u fluctuations in the streamwise
direction while they appear to have the opposite effect in the wall-normal direction. The
proper orthogonal decomposition of velocity fluctuations shows that the inclined shear
layer structure of Newtonian wall flows becomes horizontal at the MDR and does not
contribute to turbulence production. |
---|---|
ISSN: | 1070-6631 1089-7666 |
DOI: | 10.1063/1.4989533 |