Highly textured Sr, Nb co-doped BiFeO 3 thin films grown on SrRuO 3 /Si substrates by rf- sputtering
In this study, (011)-highly oriented Sr, Nb co-doped BiFeO 3 (BFO) thin films were successfully grown on SrRuO 3 /Si substrates by rf-magnetron sputtering. The presence of parasite magnetic phases was ruled out based on the high resolution x-ray diffraction data. BFO films exhibited a columnar-like...
Gespeichert in:
Veröffentlicht in: | Journal of applied physics 2011-07, Vol.110 (2), p.024114-024114-7 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | In this study, (011)-highly oriented Sr, Nb co-doped BiFeO
3
(BFO) thin films were successfully grown on SrRuO
3
/Si substrates by rf-magnetron sputtering. The presence of parasite magnetic phases was ruled out based on the high resolution x-ray diffraction data. BFO films exhibited a columnar-like grain growth with rms surface roughness values of ≈5.3 nm and average grain sizes of ≈65-70 nm for samples with different thicknesses. Remanent polarization values (2
P
r
) of 54
μ
C cm
−2
at room temperature were found for the BFO films with a ferroelectric behavior characteristic of an asymmetric device structure. Analysis of the leakage mechanisms for this structure in negative bias suggests Schottky injection and a dominant Poole-Frenkel trap-limited conduction at room temperature. Oxygen vacancies and Fe
3+
/Fe
2+
trap centers are consistent with the surface chemical bonding states analysis from x-ray photoelectron spectroscopy data. The (011)-BFO/SrRuO
3
/Si film structure exhibits a strong magnetic interaction at the interface between the multiferroic film and the substrate layer where an enhanced ferromagnetic response at 5 K was observed. Zero-field cooled (ZFC) and field cooled (FC) magnetization curves of this film system revealed a possible spin glass behavior at spin freezing temperatures below 30 K depending on the BFO film thickness. |
---|---|
ISSN: | 0021-8979 1089-7550 |
DOI: | 10.1063/1.3610428 |