Spatial variation of physicochemical parameters in a constructed wetland for wastewater treatment: an example of the use of the R programming language

Introduction: The implementation of wastewater treatment systems such as constructed wetlands has a growing interest in the last decade due to its low cost and high effectiveness in treating industrial and residential wastewater. Objective: To evaluate the spatial variation of physicochemical parameters in a constructed wetland system of sub-superficial flow of Pennisetum alopecuroides (Pennisetum) and a Control (unplanted). The purpose is to provide an analysis of spatial dynamic of physicochemical parameters using R programming language. Methods: Each of the cells (Pennisetum and Control) had 12 piezometers, organized in three columns and four rows with a separation distance of 3,25m and 4,35m, respectively. The turbidity, biochemical oxygen demand (BOD), chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN), ammoniacal nitrogen (N-NH4), organic nitrogen (N-org.) and phosphorous (P-PO4-3) were measured in water under in-flow and out-flow of both conditions Control and Pennisetum (n= 8). Additionally, the oxidation-reduction potential (ORP), dissolved oxygen (DO), conductivity, pH and water temperature, were measured (n= 167) in the piezometers. Results: No statistically significant differences between cells for TKN, N-NH4, conductivity, turbidity, BOD, and COD were found; but both Control and Pennisetum cells showed a significant reduction in these parameters (P