Application of enzymatic preparations to produce araçá pulp and juice

In the present study, the effect of pectinases on the production of pulp and juice of araçá and the presence of bioactive compounds were evaluated. An enzyme extract (EE) produced by Aspergillus niger LB-02-SF in solid state fermentation and the commercial enzyme Ultrazym®AFP-L were used in this stu...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Ciência e tecnologia de alimentos 2014-12, Vol.34 (4), p.657-662
Hauptverfasser: Sandri, Ivana Greice, Piemolini-Barreto, Luciani Tastch, Fontana, Roselei Claudete, Silveira, Mauricio Moura da
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:In the present study, the effect of pectinases on the production of pulp and juice of araçá and the presence of bioactive compounds were evaluated. An enzyme extract (EE) produced by Aspergillus niger LB-02-SF in solid state fermentation and the commercial enzyme Ultrazym®AFP-L were used in this study. After enzyme treatment with the EE preparation, the extraction yield increased by 23.1% and viscosity decreased by 42.8%, during pulp maceration. During juice processing, there was an increase of 70.6% in clarification and a decrease of 72.87% in turbidity. Higher values of these parameters, 47.7, 69.0, 80.7, and 79.7%, respectively, were obtained using the Ultrazym®AFP-L, which also led to a significant increase in the polyphenol content, both in the pulp (24%) and in the juice (28%), with a less pronounced effect when the EE was applied (10 and 21%, respectively). The anthocyanins content in the araçá pulp increased after treatment with the commercial preparation (23%), and there was no significant increase with the use of EE. The use of Ultrazym®AFP-L increased the β-carotene content by 29.4% in the fruit pulp, while the treatment with EE did not result in significant changes compared with those of the juice and pulp controls.
ISSN:1678-457X
1678-457X
DOI:10.1590/1678-457X.6381