High temperature tribological behaviour of Al/Al2O3 composite coating on γ-TiAl

To improve the high temperature wear resistance of Ti-46·5Al-1Cr-1·5V, an Al/Al 2 O 3 composite ceramic coating was prepared on it by radio frequency sputtering. In this paper, microstructure, elements distribution, phase identification of the Al/Al 2 O 3 composite coating were investigated. Also, its nanohardness and elastic modulus were examined. High temperature dry sliding wear behaviour at 300°C was analysed in details. The results indicated that the homogeneous and dense composite coating was about 20 μm thick. Additionally, the composite coating possessed higher H/E and H 3 /E 2 ratios than those of substrate. Compared to the substrate, the Al/Al 2 O 3 composite coating recorded a lower friction coefficient and the volume loss of Al/Al 2 O 3 coating was only 1/3 of the bare substrate under dry sliding conditions at 300°C. All the results demonstrated that the Al/Al 2 O 3 coating has effectively improved the wear resistance of Ti-46·5Al-1Cr-1·5V at 300°C.