Water splitting mediated by an electrocatalytically driven cyclic process involving iron oxide species
For a good reason, water splitting is the most pioneering energy storage technology. However, particularly water electrolysis still has a shadow existence compared to currently used methods for mass production of hydrogen. All known materials currently exploited as anodes for electrocatalytically in...
Gespeichert in:
Veröffentlicht in: | Journal of materials chemistry. A, Materials for energy and sustainability Materials for energy and sustainability, 2020-01, Vol.8 (19), p.9896-991 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | For a good reason, water splitting is the most pioneering energy storage technology. However, particularly water electrolysis still has a shadow existence compared to currently used methods for mass production of hydrogen. All known materials currently exploited as anodes for electrocatalytically initiated water-splitting suffer from high overpotentials and substantial mass loss during long term operation in acidic media. Low electrode stability affects operating and maintenance costs and together with high overpotentials directly lowers the overall efficiency of electrocatalytically driven splitting of water. In circumventing these problems, scientists and engineers are currently modifying electrode materials. We chose a completely different path and modified the electrolyte. An electrolysis set up, that consists of a Ni42 stainless steel anode and of hematite which is suspended in high concentration in sulfuric acid and acts as the electrolyte, exhibits oxygen evolution electrocatalysis at extremely low potential (1.26 V
vs.
RHE; 0.5 M H
2
SO
4
,
j
= 30 mA cm
−2
). If implemented in a suitable electrolyzer, an ultralow cell voltage of 1.6 V and an almost quantitative charge to oxygen + hydrogen conversion rate can be achieved. Remarkably, the negligible mass loss of the anode which consists exclusively of non-platinum group metals (non-PGM) during 100 h of operation. Experiments aimed at clarifying the mechanism suggest that Fe
2
O
3
is converted to a Fe(
ii
)/Fe(
iii
) oxide species on the cathode which is then reconverted to Fe
2
O
3
upon release of molecular oxygen when touching the anode. As a result, the oxygen-evolving centers are likely to be on the oxide particles rather than on the electrode. This proposed mechanism would explain the low potential of the OER electrode (+1.26 V
vs.
RHE at
j
= 30 mA cm
−2
) that could not be explained convincingly by an assumed direct oxidation of water molecules.
The water splitting reaction mediated by an electrocatalytically driven cycle with suspended iron oxide species enables significantly lower overpotentials for the oxygen evolution reaction compared to classic electrolysis of clear electrolytes. |
---|---|
ISSN: | 2050-7488 2050-7496 |
DOI: | 10.1039/d0ta03340e |