A paper-based conductive immunosensor for the determination of

We report for the first time a highly sensitive and rapid quantitative method for the detection of Salmonella Typhimurium ( S. Typhimurium ) using a conductive immunosensor on a paper-based device (PAD). S. Typhimurium monoclonal antibodies (MA) were first immobilized on a paper-based device and then captured by S. Typhimurium . After an immunoreaction on the device, the polyclonal antibody-colloidal gold conjugate (PA-AuNPs) was dropped to bind with S. Typhimurium . After a complete sandwich reaction, a dark red color appeared on the paper-based device, which can be observed by the naked eye for a rapid screening test. The electrical conductivity of PA-AuNPs between the screen-printed electrodes on the paper-based device was also measured for an accurate quantitative analysis. The electrical conductivity correlated well with the concentration of S. Typhimurium , which was controlled by the amount of S. Typhimurium attached to the polyclonal antibody-colloidal gold conjugate. The device showed a linear correlation for the concentration of the S. Typhimurium in the range of 10-10 8 CFU mL −1 in a logarithmic plot, with an R 2 value of 0.9882 and a limit of detection (LOD) as low as 10 CFU mL −1 . This simple, highly sensitive, and rapid method for the S. Typhimurium detection was successfully performed within 30 min, and it can be developed into small portable measuring devices in order to facilitate preliminary screening tests. We report for the first time a highly sensitive and rapid quantitative method for the detection of Salmonella Typhimurium ( S. Typhimurium ) using a conductive immunosensor on a paper-based device (PAD).