Rational design of MgF catalysts with long-term stability for the dehydrofluorination of 1,1-difluoroethane (HFC-152a)

In this study, three different approaches, i.e. the solgel method, precipitation method and hard-template method, were applied to synthesize MgF 2 catalysts with improved stability towards the dehydrofluorination of hydrofluorocarbons (HFCs); the in situ XRD technique was employed to investigate the relationship between the calcination temperature and the crystallite size of precursors to determine optimal calcination temperature for the preparation of the MgF 2 catalysts. Moreover, the physicochemical properties of MgF 2 catalysts were examined via BET, XRD, EDS and TPD of NH 3 and compared. Undoubtedly, the application of different methods had a significant influence on the surface properties and catalytic performances of MgF 2 catalysts. The surface areas of the catalysts prepared by the precipitation method, solgel method and template method were 120, 215 and 304 m 2 g 1 , respectively, upon calcination at 200 C. However, the surface area of the MgF 2 catalysts decreased significantly when the calcination temperatures of 300 and 350 C were applied. The catalytic performance of these catalysts was evaluated via the dehydrofluorination of 1,1-difluoroethane (HFC-152a). The MgF 2 catalyst prepared by the precipitation method showed the lowest catalytic activity among all the MgF 2 catalysts. When the calcination temperature was above 300 C, the MgF 2 catalysts prepared via the template method demonstrated the highest catalytic conversion rate with catalytic activity following the order: MgF 2 -T (template method) > MgF 2 -S (solgel method) > MgF 2 -P (precipitation method). The conversion rate generally agreed with the total amount of acid on the surface of the catalysts, which was measured by the NH 3 -TPD technique. The MgF 2 -T catalysts were further examined for the dehydrofluorination of HFC-152a for 600 hours, and a conversion rate greater than 45% was maintained, demonstrating superior long-term stability of these catalysts. In this study, solgel, precipitation and hard-template methods were applied to synthesize MgF 2 catalysts with improved stability towards dehydrofluorination of hydrofluorocarbons and MgF 2 -T catalysts demonstrated superior long-term stability.