Structure-performance relationship in CuO/SBA-15-type SOx adsorbent: evolution of copper-based species under different regenerative treatmentsElectronic supplementary information (ESI) available. See DOI: 10.1039/c7cy01010a

Sulphur oxides (SO x ) represent a major air pollutant and are controlled by national and international regulations. CuO/SiO 2 materials are known as SO x trap materials. However, their large-scale development is still hampered by the sintering of the active phase over multiple adsorption/regenerati...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Berger, M, Fioux, P, Dorge, S, Nouali, H, Habermacher, D, Fiani, E, Vierling, M, Moliere, M, Brilhac, J. F, Patarin, J
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Sulphur oxides (SO x ) represent a major air pollutant and are controlled by national and international regulations. CuO/SiO 2 materials are known as SO x trap materials. However, their large-scale development is still hampered by the sintering of the active phase over multiple adsorption/regeneration cycles, leading to the progressive decrease in SO x adsorption capacities of the adsorbent. In this work, SBA-15 organised mesoporous silica was functionalized with highly dispersed Cu 2+ -based species. The as-obtained adsorbent was then assessed as a regenerable SO x trap material. An extended characterisation was performed along with adsorption/regeneration cycles to correlate the evolution of the copper species with the performance of the adsorbent under different regenerative treatments. Thermal regeneration at 600 °C under pure N 2 leads to the formation of Cu + -based species, enabling a significant increase in SO x chemisorption efficiency, which nevertheless decreases during the subsequent cycles due to progressive sintering of the active phase, leading to bulky copper( ii ) oxide particles. Regeneration under reductive conditions (0.5 vol% of H 2 in N 2 ) was then investigated as a way to decrease the regeneration temperature and limit this sintering process. It was found that the general behaviour of the copper-based species was very sensitive to the regeneration temperature. At 600 °C, the active phase was completely converted into large metallic copper particles, giving rise to a fast decrease in SO x adsorption capacity of the adsorbent due to partial obstruction of the SBA-15 silica porosity. Conversely, when this regeneration was performed at 280 °C, no decrease in performances was noticed, and the copper species remained as a highly dispersed phase on the silica support. Desulfurization of industrial flue gas stream: characterization of the evolution of copper active sites along SO x adsorption/regeneration cycling experiments in CuO/SBA-15-type adsorbent.
ISSN:2044-4753
2044-4761
DOI:10.1039/c7cy01010a