Photocatalytic degradation of acetone and butane on mesoporous titania layers

Mesoporous titania was prepared by homogeneous hydrolysis of titanium oxo-sulfate with urea in aqueous solutions in the presence of the cationic and anionic surfactants, cetyl trimethyl ammonium bromide (CTAB) and sodium dodecyl benzene sulfonate (SDBS), respectively. Following annealing at 600 °C the structure of prepared samples was determined with X-ray powder diffraction (XRD) and selected area electron diffraction (SAED). The morphology and microstructure characteristics were also obtained by scanning electron microscopy (SEM) and high resolution electron microscopy (HRTEM). Surface area (BET) and porosity were also determined. From the mesoporous titania samples, a 300 μm thin layer on glass desk 10 × 15 cm was created. The photocatalytic activity of the prepared layers was assessed from the kinetics of the photocatalytic degradation of butane and acetone in the gas phase. From mesoporous titania samples, a 300 μm thin layer on glass desk 10 × 15 cm was created and the photocatalytic activity of the prepared layers was assessed from the kinetics of the photocatalytic degradation of butane and acetone in gaseous phases.