Two-Layer Rubber-Based Composite Material and UHMWPE with High Wear Resistance

The aim of the study is the development of two-layer materials based on ultra-high-molecular-weight polyethylene (UHMWPE) and isoprene rubber (IR) depending on the vulcanization accelerators (2-mercaptobenzothiazole (MBT), diphenylguanidine (DPG), and tetramethylthiuram disulfide (TMTD)). The article presents the study of the influence of these accelerators on the properties and structure of UHMWPE. It is shown that the use of accelerators to modify UHMWPE leads to an increase in tensile strength of 28–53%, a relative elongation at fracture of 7–23%, and wear resistance of three times compared to the original UHMWPE. It has been determined that the introduction of selected vulcanization accelerators into UHMWPE leads to an increase in adhesion between the polymer and rubber. The study of the interfacial boundary of a two-layer material with scanning electron microscopy (SEM) and infrared spectroscopy (FTIR) showed that the structure is characterized by the presence of UHMWPE fibrils localized in the rubber material due to mechanical adhesion.