Bond-Slip Relationship between Sand-Coated Polypropylene Coarse Aggregate Concrete and Plain Rebar

Recycled plastic waste as an aggregate in concrete mixtures is one of the important issues in the construction industry since it allows the reduction of building weight and has beneficial effects on the environment. In addition, the bonding ability of this kind of lightweight concrete to reinforceme...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Materials 2022-04, Vol.15 (7), p.2643
Hauptverfasser: Purnomo, Heru, Chalid, Mochamad, Pamudji, Gandjar, Arrifian, Taufiq Wildan
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Recycled plastic waste as an aggregate in concrete mixtures is one of the important issues in the construction industry since it allows the reduction of building weight and has beneficial effects on the environment. In addition, the bonding ability of this kind of lightweight concrete to reinforcement is also a prerequisite as a composite material in forming reinforced concrete structures. Therefore, in this study, the bond of plain rebar embedded in artificial lightweight aggregate concrete made from polypropylene plastic waste coated with sand was investigated. A pull-out test of nine group specimens was conducted to study the bond strength of 10 mm, 12 mm, and 16 mm diameter plain rebar embedded in polypropylene plastic waste coarse aggregates lightweight concrete (PWCAC), failure mode, and bond stress-slip relationship. The test results show that the bond-slip relationship and bond strength depend mainly on the bar diameter for PWCAC. Meanwhile, for all PWCAC specimens tested, the pull-out failure modes were observed. A bond equation for PWCAC was formulated by performing a regression analysis on the experimental results and afterward was combined with an existing bond-slip equation for normal concrete to have the bond-slip formulation for the lightweight concrete studied. The comparison between the model and experimental results indicates a close agreement.
ISSN:1996-1944
1996-1944
DOI:10.3390/ma15072643