Freehand Anatomic Transtibial Single-Bundle Anterior Cruciate Ligament Reconstruction

[Display omitted] Creation of the femoral tunnel for single-bundle anterior cruciate ligament (ACL) reconstruction has a high rate of nonanatomic placement with the transtibial (TT) technique but yields better restoration with the anteromedial portal technique and close restoration of the anatomic femoral footprint with the outside-in technique. Modifications of the traditional (TT) technique have been described to restore the native femoral ACL footprint and to simulate double-bundle reconstruction. Modified TT techniques try to capture the anatomic femoral footprint through an anatomic tibial tunnel. In the technique described in this article, the anatomic femoral footprint is drilled first by the use of a 2.5-mm Kirschner wire through the parapatellar anteromedial portal, making an angle 30° to the sagittal plane and 20° to the horizontal plane. The wire is drilled while the knee is hyperflexed and then withdrawn from outside until its distal end reaches the intercondylar notch. The wire is then advanced in an antegrade manner while the knee is flexed 90° until it reaches the center of the marked tibial footprint. The angle of knee flexion may be slightly increased or decreased around 90° with or without slight internal rotation to capture the anatomic tibial footprint. The procedure is completed as a TT single-bundle ACL reconstruction.