PSIV-17 Effects of Trace Mineral Source and Level on Growth Performance and Carcass Characteristics of Grow-finish Pigs

Abstract Two experiments were conducted to determine the effects of trace mineral source and level for grow-finish pigs. In Exp. 1, 2,168 pigs (initial BW = 23.0 kg) were used in a 117-d trial. There were 5 treatments based on inorganic (sulfates and oxides) or organic (Alltech Bioplex, Lexington, KY) minerals supplemented at different levels as follows: 1) Industry inorganic (120 mg/kg Zn, 100 mg/kg Fe, 40 mg/kg Mn, 10 mg/kg Cu); 2) 100% NRC inorganic (60 mg/kg Zn, 60 mg/kg Fe, 2.2 mg/kg Mn, 4 mg/kg Cu); 3) 33% NRC organic (20 mg/kg Zn, 20 mg/kg Fe, 0.7 mg/kg Mn, 1.3 mg/kg Cu); 4) 66% NRC organic (40 mg/kg Zn, 40 mg/kg Fe, 1.5 mg/kg Mn, 2.6 mg/kg Cu); and 5) 100% NRC organic (60 mg/kg Zn, 60 mg/kg Fe, 2.2 mg/kg Mn, 4 mg/kg Cu). Selenium level was 0.30 mg/kg for all treatments. Treatment 1 had 14 replicates and the other treatments had 18 replicates. Pigs were weighed approximately every three weeks and carcass data was collected at the end of the trial. Data was analyzed with SAS MIXED procedure. There was no evidence for differences (P > 0.10) for overall ADG, ADFI, G:F, and final BW. Pigs fed 66% NRC organic had the highest (P < 0.05) percentage lean and loin depth. In Exp. 2, 1,188 pigs (initial BW = 25.9 kg) were used in a 120-d trial with two treatments: 1) Industry inorganic and 2) 66% NRC organic, with the same mineral levels as Exp. 1 and 24 replicates per treatment. There was no difference (P > 0.10) in growth performance. Similar to Exp. 1, pigs fed 66% NRC organic had higher (P < 0.05) percentage lean and loin depth. In conclusion, lower levels of organic trace minerals resulted in improved carcass characteristics without compromising growth performance.