Determination of single cryoablation outcome within 30 to 60 seconds of freezing based on ice impedance

Background A direct indicator of effective pulmonary vein isolation (PVI) based on early ice formation is presently lacking. Objective The initial impedance rise within 30 to 60 seconds (sec) of single cryoablation relating to ice on the distal surface of the cryoballoon could; predict effective PVI with early termination, the need for prolonging the cryoablation, or failure to achieve effective ablation. Methods Impedance measurements were taken between two ring electrodes, at the anterior balloon surface and at the shaft behind the balloon. Ice covering the anterior ring leads to impedance rise. Single cryoablation (eight animals, 37 veins) was applied for 90 to 180 sec. Cryoapplication was terminated if the impedance reached ≥500 Ω. Impedance levels at ≤60 sec of cryoablation were divided into three groups based on the characteristics of the impedance rise. PVI was confirmed acutely and at 45 ± 9 days recovery by electrophysiology mapping and histopathology. Results At 60 sec of freezing, an impedance rise of 34.1 ± 15.2 Ω (13‐50 Ω) and slope of the impedance rise (measured during 15‐30 sec of cryoapplication) less than 1 Ω/sec resulted in failed PVI. An impedance rise of 104.4 ± 31.5 Ω (76‐159 Ω) and slope of 2 Ω/sec resulted in 100% PVIs. An impedance rise of 130.9 ± 137.8 Ω (40‐590 Ω) and slope of 10 Ω/sec resulted in 100% PVIs with early termination at 90 sec. Conclusion The efficacy of single cryoablation can be defined within 30 to 60 sec based on ice impedance. Three unique impedance profiles described in this investigation are associated with the uniformity and thickness of the ice buildup on the anterior surface of the balloon. One cryoablation with an adequate impedance rise is needed for successful outcomes.