Diagnostic microarray for 14 water and foodborne pathogens using a flatbed scanner

Parallel detection approaches are of interest to many researchers interested in identifying multiple water and foodborne pathogens simultaneously. Availability and cost-effectiveness are two key factors determining the usefulness of such approaches for laboratories with limited resources. In this study, we developed and validated a high-density microarray for simultaneous screening of 14 bacterial pathogens using an approach that employs gold labeling with silver enhancement (GLS) protocol. In total, 8887 probes (50-mer) were designed using an in-house database of virulence and marker genes (VMGs), and synthesized in quadruplicate on glass slides using an in-situ synthesis technology. Target VMG amplicons were obtained using multiplex polymerase chain reaction (PCR), labeled with biotin, and hybridized to the microarray. The signals generated after gold deposition and silver enhancement, were quantified using a flatbed scanner having 2-μm resolution. Data analysis indicated that reliable presence/absence calls could be made, if: i) over four probes were used per gene, ii) the signal-to-noise ratio (SNR) cutoff was greater than or equal to two, and iii) the positive fraction (PF), i.e., number of probes with SNR≥2 for a given VMG was greater than 0.75. Hybridization of the array with blind samples resulted in 100% correct calls, and no false positive. Because amplicons were obtained by multiplex PCR, sensitivity of this method is similar to PCR. This assay is an inexpensive and reliable technique for high throughput screening of multiple pathogens. •A gold-silver labeling technique was validated for the presence of 14 pathogens.•The labeling method allows use of a low cost flatbed scanner for presence/absence.•The method is extendable to detection of other pathogens in limited resource settings.•Hybridization of the 8000 probe array with blind samples resulted in 100% correct calls.