Penternary chalcogenides nanocrystals as catalytic materials for efficient counter electrodes in dye-synthesized solar cells

The penternary chalcogenides Cu 2 CoSn(SeS) 4 and Cu 2 ZnSn(SeS) 4 were successfully synthesized by hot-injection method and employed as a catalytic materials for efficient counter electrodes in dye-synthesized solar cells (DSSCs). The structural, compositional, morphological and optical properties of these pentenary semiconductors were characterized by X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), energy-dispersive spectrometer (EDS) and ultraviolet-visible (UV–Vis) spectroscopy. The Cu 2 CoSn(SeS) 4 and Cu 2 ZnSn(SeS) 4 nanocrystals had a single crystalline, kesterite phase, adequate stoichiometric ratio, 18–25 nm particle sizes which are forming nanospheres and band gap energy of 1.18 and 1.45 eV, respectively. Furthermore, the electrochemical impedance spectroscopy and cyclic voltammograms indicated that Cu 2 CoSn(SeS) 4 nanocrystals as counter electrodes exhibited better electrocatalytic activity for the reduction of iodine/iodide electrolyte than that of Cu 2 ZnSn(SeS) 4 nanocrystals and conventional platinum (Pt). The photovoltaic results demonstrated that DSSC with a Cu 2 CoSn(SeS) 4 nanocrystals-based counter electrode achieved the best efficiency of 6.47%, which is higher than the same photoanode employing a Cu 2 ZnSn(SeS) 4 nanocrystals (3.18%) and Pt (5.41%) counter electrodes. These promising results highlight the potential application of penternary chalcogen Cu 2 CoSn(SeS) 4 nanocrystals in low-cost, high-efficiency, Pt-free DSSCs.