Upcycling of Expanded Polystyrene Waste-Impregnated PVP Using Wet-Phase Inversion for Effective Microalgae Harvesting
The aim of this study was to investigate the potential of upcycling Expanded Polystyrene (EPS) waste collected from food packaging into a membrane for microalgae harvesting, in which membrane filtration often challenges fouling and pore blocking. The target species is , with as a comparison agent. T...
Gespeichert in:
Veröffentlicht in: | Polymers 2024-09, Vol.16 (19), p.2703 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | The aim of this study was to investigate the potential of upcycling Expanded Polystyrene (EPS) waste collected from food packaging into a membrane for microalgae harvesting, in which membrane filtration often challenges fouling and pore blocking. The target species is
, with
as a comparison agent. The membrane was fabricated from used Styrofoam, which typically ends up as single-use food packaging waste. In this study, PVP was used as an additive at varying concentrations, from 2 wt.% to 8 wt.%. The experimental results indicated that despite varying PVP concentrations, all EPS waste membranes exhibited near-complete recovery of
biomass extraction. Despite the similar harvesting efficiency, EPS/PVP-8 exhibited the largest flux of 970.5 LMH/Bar, which is twice the value of the pristine EPS waste membrane. All membranes were hydrophilic; however, hydrophobicity increased with PVP concentration. SEM micrographs revealed that PVP enlarged the membrane surface pores and improved connectivity within the membrane's structure, ensuring efficient flow. The EPS waste membrane offers promising insights for sustainable materials and wastewater treatment. The upcycling of EPS waste into flat sheet membranes not only addresses the problem of Styrofoam waste accumulation but also paves the way to transform waste into valuable products. |
---|---|
ISSN: | 2073-4360 2073-4360 |
DOI: | 10.3390/polym16192703 |