A modified intraventricular balloon method for functional assessment of hearts from donation after circulatory death

Functional assessment of hearts during ex-vivo heart perfusion is not well-established. Conventional intraventricular balloon methods for large animals sacrifice the mitral valve. This study assessed the effectiveness of the modified intraventricular balloon method in comparison with other modalitie...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:JTCVS open 2024-04, Vol.18, p.104-117
Hauptverfasser: Kadowaki, Sachiko, Parker, Marlee, Wang, Jian, Mueller, Brigitte, Steve Fan, Chun-Po, Li, Jing, Honjo, Osami
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Functional assessment of hearts during ex-vivo heart perfusion is not well-established. Conventional intraventricular balloon methods for large animals sacrifice the mitral valve. This study assessed the effectiveness of the modified intraventricular balloon method in comparison with other modalities used during working mode in juvenile pigs. Following asphyxia circulatory arrest, hearts were ischemic for 15 minutes and then reperfused on an ex-vivo device for 2 hours before switching to working mode. Left ventricular pressure was continuously measured during reperfusion by a saline-filled balloon fixated in the left atrium. Spearman Correlation Coefficients with linear regression lines with confidence intervals were analyzed. Maximum dp/dt at 90 minutes of reperfusion and minimum dp/dt at 60 minutes of reperfusion showed a moderate positive correlation to that in working mode, respectively (Rs = 0.61, P = .04 and Rs = 0.60, P = .04). At 60 minutes of reperfusion, minimum dp/dt showed moderate positive correlation to tau (Rs = 0.52, P = .08). Myocardial oxygen consumption during reperfusion consistently decreased at least 30% compared to working mode (at 90 minutes as the highest during reperfusion, 3.3 ± 0.8; in working mode, 5.6 ± 1.4, mLO2/min/100 g, P 
ISSN:2666-2736
2666-2736
DOI:10.1016/j.xjon.2024.01.009