Corrosion potential and theoretical studies of fabricated Schiff base for carbidic austempered ductile iron in 1M H 2 SO 4 solution

In this body of work, a chemical known as 2-cyano-N-(4-morpholino benzyl dine) acetohydrazide (CMBAH) is explored for its ability to suppress the carbidic austempered ductile iron (CADI) corrosion in 1M H SO . Density functional theory was used in experiments and theoretical investigations to investigate the inhibiting impact. The corrosion of CADI alloys in 1M H SO produced a corrosion resistance superior to that of CADI heat treatment (H.T.). As-cast carbidic ductile iron (CDI) 4 alloy with 1.5%t Cr-Nb has a corrosion rate (C.R.) of 11.69 mm/year, which drops to 5.31 mm/year at HT-275 °C and 6.13 mm/year at HT-375 °C. When describing the adsorption of inhibitors, the Langmuir adsorption isotherm is the most effective method. The findings of the G show that the inhibition was induced mainly by the physisorption on the surface CADI alloys. In addition to this, it was found that the results of the experiments and the hypotheses were largely harmonious with one another. The formation of protective layers on the CADI surfaces is also visible in the images captured by the SEM. In 1M H SO , these Schiff base inhibitors effectively prevent corrosion caused by CADI. However, the combination of inhibitors leads to a fine microstructure with ausferrite and narrow ferrite needles, promoting corrosion resistance. The CADI needles rated an upper ausferritic microstructure with wide ferrite needles.