Mixed-Size Component Printing

Mixed-Size Component Printing

Table 3 shows the standard order design table. Before each block of DOE was started, print parameters were optimized. Print optimization started with printing a board with the paste manufacturer's recommended settings, followed by visual inspection to verify the board-stencil alignment. The off...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Circuits Assembly 2009-07, Vol.20 (7), p.17
1. Verfasser: Mohanty, Rita
Format: Artikel
Sprache:eng
Schlagworte:
Broadband
Design optimization
Efficiency
Noise control
Printed circuit boards
Printing
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Table 3 shows the standard order design table. Before each block of DOE was started, print parameters were optimized. Print optimization started with printing a board with the paste manufacturer's recommended settings, followed by visual inspection to verify the board-stencil alignment. The offsets were then input in the printer, and the same board was cleaned and printed again. This process was repeated until the paste was completely deposited on the pads.
ISSN:1054-0407