Numerical analysis of concrete block masonry beams under three point bending

A parametrical study of masonry beams through numerical modelling has been performed in order to better understand the mechanical behaviour of these elements. Boundary conditions, geometry and reinforcement ratios are the main parameters analysed in this study. The numerical simulation is performed with DIANA ® software, based on the Finite Element Method. A comparison between numerical and experimental results is presented in order to validate the simulation. In conclusion, it was verified that the behaviour of masonry beams is greatly affected by the boundary conditions and geometry, as expected. With regard to reinforcement, it was noted that horizontal reinforcement increases the flexural strength of beams. On the other hand, variation in horizontal reinforcement had no influence on the shear resistance of masonry beams. Finally, the combination of horizontal and vertical reinforcements is shown to enhance the flexural and shear behaviour of masonry beams. ► A parametrical study of masonry beams through numerical modelling has been performed. ► Boundary conditions, geometry and reinforcement ratios are the parameters analysed. ► The behaviour of masonry beams is affected by the boundary conditions and geometry. ► Horizontal reinforcement increases the flexural strength of masonry beams. ► Horizontal reinforcement had no influence on the shear resistance of masonry beams.