Optimization of GTE blade milling parameters on NC machines

Optimization of GTE blade milling parameters on NC machines

In this paper, the procedure of optimizing the milling conditions of GTE blade duct surfaces on NC machines with the use of minimal labor intensity criterion is presented. Depending on a degree of the blade surface curvature and assuming that the feed to the tooth S ^sub z^ is constant, the control...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Russian aeronautics 2007-06, Vol.50 (2), p.193-198
Hauptverfasser: Lunev, A. N., Moiseeva, L. T., Solomina, M. V.
Format: Artikel
Sprache:eng
Schlagworte:
Blades
Criteria
Curvature
Feed rate
Mathematical analysis
Milling (machining)
Numerical control
Numerical controls
Optimization
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:In this paper, the procedure of optimizing the milling conditions of GTE blade duct surfaces on NC machines with the use of minimal labor intensity criterion is presented. Depending on a degree of the blade surface curvature and assuming that the feed to the tooth S ^sub z^ is constant, the control of the minute feed rate S ^sub min^ is executed.[PUBLICATION ABSTRACT]
ISSN:1068-7998
1934-7901
DOI:10.3103/S1068799807020134