Mechanical End Turn Analysis for a 33 T Resistive Magnet at the Nijmegen HFML

Mechanical End Turn Analysis for a 33 T Resistive Magnet at the Nijmegen HFML

We present an improved mechanical end turn design for the 33 T resistive magnets, which have been installed in 2003 at the Nijmegen HFML. The improvement was necessary because of a failing clamping construction of the innermost two coils, which are electrically as well as mechanically in parallel. W...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on applied superconductivity 2006-06, Vol.16 (2), p.949-952
Hauptverfasser: Wiegers, S.A.J., Rook, J., Perenboom, J.A.A.J., Maan, J.C.
Format: Artikel
Sprache:eng
Schlagworte:
Applied sciences
Clamping
Clamps
Coils
Conducting materials
Conductors (devices)
Construction
Design engineering
Electrical engineering. Electrical power engineering
Electromagnets
Exact sciences and technology
High magnetic fields
Laboratories
Magnetic analysis
Magnetic fields
Magnetic materials
Materials reliability
resistive magnet
Superconducting coils
Superconductivity
Temperature
Various equipment and components
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:We present an improved mechanical end turn design for the 33 T resistive magnets, which have been installed in 2003 at the Nijmegen HFML. The improvement was necessary because of a failing clamping construction of the innermost two coils, which are electrically as well as mechanically in parallel. We show that by taking proper care it is possible to reliably clamp parallel coils with only one set of tierods, leaving as much space as possible for the conductor material of the innermost coil
ISSN:1051-8223
1558-2515
DOI:10.1109/TASC.2006.870789