Fabrication and electrical properties of barium strontium titanate thick films by modified sol–gel method

A modified sol–gel method has been developed to prepare for the barium strontium titanate (Ba 0.6 Sr 0.4 TiO 3 , BST) thick films. The films were deposited on either Pd–Ag electroded alumina substrates (Pd–Ag/Al 2 O 3 ) or silver electroded alumina (Ag/Al 2 O 3 ) substrates by spin coating technique or screen printing technique. The thickness of the film was in the range of 2–10 μm. The key point of the process is to disperse fine-grained BST ceramic powders prepared by high energy ball mill into BST sol solution to form a slurry for spin coating and screen printing. In order to enhance the stability of the slurry and to avoid crack formation of the thick film, organic macromolecular poly-vinylpyrrolidone (PVP) was added to the sol solution. The structure and surface morphology of the films were studied by X-ray diffraction and Scanning Electron Microscope (SEM) techniques. It is revealed that the thick films exhibit pure perovskite phase and are crack-free, dense and homogeneous. The dielectric constant and loss tangent of the thick films are about 1200 and 0.01, at 10 °C and 1 KHz, respectively.