Examination of Substrate Surface Melting-Induced Splashing During Splat Formation in Plasma Spraying

Impacting of a molten droplet with a melting point much higher than the substrate results in melting of the substrate around the impact area. Melting of the substrate surface to a certain depth alters the flow direction of the droplet. The significant change of fluid flow direction leads to the detaching of fluid from the substrate. Consequently, splashing occurs during the droplet-spreading process. In the current study, molybdenum (Mo) splats were formed on a stainless steel substrate under different plasma-spraying conditions. For comparison, Mo splats were also deposited on an Mo surface. The substrate surface was polished prior to deposition. The powders used had a narrow particle size distribution. The results show that the morphology of splats depends significantly on the thermal interaction between the molten particle and the substrate. The splat observed was only a central part of an ideal disk-like complete splat. The typical pattern of Mo splats was of the split type, presenting a small split structure on the surface of the stainless steel substrate. With Mo particles, the preheating of a steel substrate has no effect on splat morphology. On the other hand, a disk-like Mo splat with a reduced diameter of a dimple-like structure at the central area of the splat was formed on Mo substrates, and splashing can be suppressed through substrate preheating. Based on the experimental results, a surface melting-induced splashing model was proposed to explain the formation mechanism of the Mo splat on a steel surface. The influence of droplet condition on splat formation is discussed.