Nanoscale porosity in SAFOD core samples (San Andreas Fault)

With transmission electron microscopy (TEM) we observed nanometer-sized pores in four ultracataclastic and fractured core samples recovered from different depths of the main bore hole of the San Andreas Fault Observatory at Depth (SAFOD). Cutting of foils with a focused ion beam technique (FIB) allowed identifying porosity down to the nm scale. Between 40 and 50% of all pores could be identified as in-situ pores without any damage related to sample preparation. The total porosity estimated from TEM micrographs (1–5%) is comparable to the connected fault rock porosity (2.8–6.7%) estimated by pressure-induced injection of mercury. Permeability estimates for cataclastic fault rocks are 10−21–10−19 m2 and 10−17 m2 for the fractured fault rock. Porosity and permeability are independent of sample depth. TEM images reveal that the porosity is intimately linked to fault rock composition and associated with deformation. The TEM-estimated porosity of the samples increases with increasing clay content. The highest porosity was estimated in the vicinity of an active fault trace. The largest pores with an equivalent radius>200nm occur around large quartz and feldspar grains or grain-fragments while the smallest pores (equivalent radius