Gap control for near-dry EDM milling with lead angle

A new gap control strategy for five-axis milling using near-dry electrical discharge machining (EDM) has been experimentally investigated. The conventional EDM control strategy only allows the retraction of the electrode in the direction of machining trajectory, which results in inefficient gap control when the electrode is not perpendicular to the workpiece. The new gap controller is capable of retracting the electrode in the direction of its orientation. This enables more efficient enlargement of the discharge gap leading to faster recovery of average gap voltage. Experimental results show a 30% increase in material removal rate while the tool electrode wear ratio and surface roughness are not affected. Furthermore, EDM efficiency is improved due to the change in the electrode retraction in its axial direction. The gain tuning of the proposed controller is also discussed. This study shows the direction of electrode retraction is important for five-axis near-dry EDM milling.