Examination of rotational fixation of the femoral component in total hip arthroplasty: a mechanical study of micromovement and acoustic emission

Rotational loosening has recently emerged as an important cause of failure of the femoral component of total hip arthroplasties. This study was designed to investigate the role played by torsional loads in loosening of cementless femoral components and to evaluate three cementing techniques involving a combination of canal irrigation, manual insertion, and vacuum mixing combined with pressure injection of the cement for their ability to improve rotational fixation. Rotational micromotion and subsidence were measured in 24 preserved human anatomic specimen femora. Acoustic emission (AE) technique was applied as a non-destructive method for evaluating material failure during loading. From the micromovement data, torque to 50 mu subsidence and torque to failure were surprisingly low with cementless fixation and with poor cement technique but were markedly improved with pulsed irrigation. Further improvement was achieved by pressure injection and vacuum mixing of the cement. However, AE was detected even in the most carefully performed cement specimens under torsional-loading conditions commonly occurring in daily activities. These signs of microfailure of the cement mantle at relatively low torsional loads suggest that the mode of failure of deeply penetrated cement is by microfracture of the cement mantle. The poor performance suggests that cementless fixation of intramedullary stems provides unsatisfactory fixation against torsional loading. There is need for major improvements in fixation mechanisms and techniques. The signs of failure of the cement mantle at normally occurring torsional loads suggest that even the best cement technique is prone to failure in torsion when exposed to normal daily use.