Wire electrical discharge machining of metal bond diamond wheels for ceramic grinding

The application of cylindrical wire Electrical Discharge Machining (EDM) for profile truing of metal bond diamond wheels is presented. Instead of using the mechanical force to break the diamond and matrix in the grinding wheel, the wire EDM process uses the thermal energy or electrical sparks between the wire and rotating grinding wheel to remove the metal bond and form the wheel. The design and manufacture of a corrosion-resistant, precise spindle with the high-electrical current capability for wire EDM truing of grinding wheel is first introduced. Three truing configurations were designed to study effects of wire EDM process parameters and to investigate the level of form accuracy and corner radii achievable by the wire EDM truing of diamond wheels. Results show that the wire EDM process can efficiently generate the μm-scale precision form on the diamond wheels. The wheel, after truing, was used to grind the silicon nitride workpiece. Grinding forces and wheel wear rate were measured. In the beginning of the grinding, high wheel wear rate was identified. The subsequent wheel wear rate was considerably lower and stabilized.