Volumetric shrinkage of composites using video-imaging

Objective. This study involves investigation of the use of video-imaging for measurement of volumetric shrinkage of composites. Methods. Six composites were tested for volumetric shrinkage using video-imaging. The volumetric shrinkage was measured using the single- and multi-view volumetric reconstruction modes. All composites were cured using a VIP TM curing light for 40 s at 500 mW/cm 2. Dynamic shrinkage was measured using the single-view mode with a red filter placed over the detector opening. Results. Analysis of the volumetric shrinkage values by a one way ANOVA for each composite showed no difference for the single- and multi-view measurement mode. The shrinkage values determined by video-imaging were compared to those measured for the same composites by mercury dilatometry by one way ANOVA followed by a paired comparison using the Bonferroni method. Conclusion. The video-imaging technique gives reproducible results for volumetric shrinkage of composites comparable to those measured by dilatometry.