Effect of implant variables on temperatures achieved during ferromagnetic hyperthermia

Effects of ferromagnetic implant variables on steady-state temperature were studied in both in vitro (phantom) and in vivo (rabbit hind limb musculature) models. Thermoseed implant variables included: (1) the presence and number of thermoseed sleeves; (2) variations in thermoseed alignment within the oscillating electromagnetic field; (3) generator power levels of 300 W, 600 W, and 1200 W; and (4) separation of thermoseed tracks by 0·8 cm versus 1 cm. When the thermoseeds were aligned parallel to the electromagnetic field, temperature distributions in the in vivo model using bare thermoseeds and thermoseeds encased in a single sleeve (0 · 1 mm wall thickness) of polyethylene tubing were statistically higher than in tests performed with thermoseeds encased in a double sleeve (0 · 25 mm over 0 · 1 mm wall thickness) of tubing (p = 0 · 006). Nonetheless, average steady-state temperatures above a therapeutic minimum (≥ 42° C) were achieved at all generator power levels using thermoseeds encased in a double sleeve of tubing and aligned parallel to the electromagnetic field. Gross misalignment of thermoseeds with the electromagnetic field was partly compensated for by utilizing higher generator power levels. Thermoseed tracks separated by 0 · 8 cm and aligned parallel to the electromagnetic field yielded average steady-state temperatures that were 0·4-2·2°C higher than those obtained with a thermoseed track separation of 1 cm.