Effect of water storage of E-glass fiber-reinforced composite on adhesion of Streptococcus mutans

This study investigated the effect of water storage of fiber-reinforced composite on the adhesion of Streptococcus mutans ( S. mutans) and its ability to stay adhered and multiply on the FRC. The materials (E-glass fibers and denture base polymer) were stored in water for 14 or 30 days or left dry....

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Biomaterials 2001-06, Vol.22 (12), p.1613-1618
Hauptverfasser: Tanner, Johanna, Vallittu, Pekka K, Söderling, Eva
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This study investigated the effect of water storage of fiber-reinforced composite on the adhesion of Streptococcus mutans ( S. mutans) and its ability to stay adhered and multiply on the FRC. The materials (E-glass fibers and denture base polymer) were stored in water for 14 or 30 days or left dry. Water contact angles of the materials before and after water storage were determined. Test specimens, with or without parotid saliva or serum pellicle, were incubated in a suspension of S. mutans allowing initial adhesion to occur. Bacterial adhesion and multiplication was studied using scanning electron microscopy. Contact angles of both materials were significantly reduced after water storage indicating an increase in surface free energy. When studied without a surface pellicle, water storage significantly increased adhesion of S. mutans to both glass and polymer. Saliva coating of the materials resulted in higher degree of adhesion to glass fibers in comparison with polymer and after 14 days water storage glass bound over twice as much S. mutans cells than the polymer matrix. Bacterial growth and biofilm formation occurred equally on both materials. The results of this in vitro study suggest that in order to avoid the possible increase in S. mutans adhesion, the reinforcing glass fibers should be covered with the matrix polymer of the composite.
ISSN:0142-9612
1878-5905
DOI:10.1016/S0142-9612(00)00314-8